1. Wich Microsoft operatingsystem can work with IEEE1394?
2. Do I need special drivers for JVC my camcorder?
3. My camcorder is not recognised by my PC, wath do I do?
4. Where can I find IEEE1394 drivers?
1. Wich Micrososft operatingsystem can work with IEEE 1394?
You can use the operatingsystems
from Microsoft windows 98 SE (Second edition), Windows ME, Windows 2000 and
Windows XP.
2. Do I need special drivers for my JVC camcorder?
JVC camcorders work with the Microsoft integrated standard drivers. Therefor JVC does not provide special drivers for transfering video via the IEEE1394 connexion. Does your soft- hardware need special drivers for JVC camcorders, please address you to your soft- hardware dealer.
3. My camcorder is not recognised by my PC, wath do I do?
Wath operating system do you use?
Windows 98 SE
Windows ME
Windows 2000
Windows XP
The driver for the 1394 DV-cart and the driver for the DV-camcorder are provided by Microsoft and can be found on the Windows-Installation-CD.
You need severall updates for
Windows SE from Microsoft.
The updates are as follow
- At first
- Secondly
These updates are necessary so your camcorder can work correctly when connected to your DV capture cart.
For the correct installation of your camcorder, you need to connect the DV-cabel (VC-VDV206U) on your IEEE1394 capture cart and then put the camcorder in the operate play mode.
In the device manager (Start / Settings / Control Panel / System) you will find under the category "1394 Bus Controller" the device "Texas Instruments-", or "PCI- OHCI Compliant IEEE 1394 Host Controller".
In the categorie "Imaging devices" you will see the DV device as "Microsoft DV camera and VCR" The device must be turnd on.
According to the IEEE1394 cart / software, the Microsoft DV driver or the Texas Instruments driver is needed to work correctly with your JVC DV device.See the documentation of your IEEE1394 Hard- / Software.
Is the image incorrect as shown on the picture below then the wrong driver is installed.
Turn off the DV device.
Install the programm DVconnect330 (
Download under http://www.aist.com
in download, DVConnect330.exe )
Restart your PC.
Turn the camcorder back on in the play mode and connect it with your DV cart.
The DV device will be recognised as a 1394
DV camcorder.
Please take note that JVC does not give any assurances on this software found under the links. Also JVC can not provide any support according this software, therefor we ask your understanding and if necessary please address you to the provider.
A overview of the compatibility with your hard- and software of the JVC devices is impossible. Please address you to the provider of your hard- and softwareproducts.
Update of your IEEE1394 hard- and software kan only be provided on the site of your IEEE1394 hard- software provider. Please contact them if there is any update available.
The driver for the 1394 DV-cart and the driver for the DV-camcorder are provided by Microsoft and can be found on the Windows-Installation-CD.
You need severall updates for
Windows ME from Microsoft.
The updates are as follow
- At first
According to the IEEE1394 cart / software, the Microsoft DV driver or the Texas Instruments driver is needed to work correctly with your JVC DV device.See the documentation of your IEEE1394 Hard- / Software.
Is the image incorrect as shown on the picture below then the wrong driver is installed.
Turn off the DV device.
Install the programm DVconnect330 (
Download under http://www.aist.com
in download, DVConnect330.exe )
Restart your PC.
Turn the camcorder back on in the play mode and connect it with your DV cart.
The DV device will be recognised as a 1394
DV camcorder.
In the device manager (Start / Settings / Control Panel / System) you will find under the category "1394 Bus Controller" the device "Texas Instruments-", or "PCI- OHCI Compliant IEEE 1394 Host Controller".
In the categorie "Imaging devices" you will see the DV device as "Microsoft DV camera and VCR" The device must be turnd on.
According to the IEEE1394 cart / software, the Microsoft DV driver or the Texas Instruments driver is needed to work correctly with your JVC DV device.See the documentation of your IEEE1394 Hard- / Software.
Is the image incorrect as shown on the picture below then the wrong driver is installed.
Turn off the DV device.
Install the programm DVconnect330 (
Download under http://www.aist.com
in download, DVConnect330.exe )
Restart your PC.
Turn the camcorder back on in the play mode and connect it with your DV cart.
The DV device will be recognised as a "1394
DV camcorder".
Please take note that JVC does not give any assurances on this software found under the links. Also JVC can not provide any support according this software, therefor we ask your understanding and if necessary please address you to the provider.
A overview of the compatibility with your hard- and software of the JVC devices is impossible. Please address you to the provider of your hard- and softwareproducts.
Update of your IEEE1394 hard- and software kan only be provided on the site of your IEEE1394 hard- software provider. Please contact them if there is any update available.
The driver for the 1394 DV-cart and the driver for the DV-camcorder are provided by Microsoft and can be found on the Windows-Installation-CD.
You need severall updates for
Windows 2000 from Microsoft.
The updates are as follow
- At first
According to the IEEE1394 cart / software, the Microsoft DV driver or the Texas Instruments driver is needed to work correctly with your JVC DV device.See the documentation of your IEEE1394 Hard- / Software.
Is the image incorrect as shown on the picture below then the wrong driver is installed.
Turn off the DV device.
Install the programm DVconnect330 (
Download under http://www.aist.com
in download, DVConnect330.exe )
Restart your PC.
Turn the camcorder back on in the play mode and connect it with your DV cart.
The DV device will be recognised as a "1394
DV camcorder".
The driver for the 1394 DV-cart and the driver for the DV-camcorder are provided by Microsoft and can be found on the Windows-Installation-CD. This OS is brand new and for so far no problems are mentioned, offcourse there are always exceptions.
4. Where can I find IEEE1394 drivers?
The IEEE1394 driver can for example be found at the site http://www.ramelectronics.net, see support , drivers.
Please take note that JVC does not give any assurances on this software found under the links. Also JVC can not provide any support according this software, therefor we ask your understanding and if necessary please address you to the provider.
A overview of the compatibility with your hard- and software of the JVC devices is impossible. Please address you to the provider of your hard- and softwareproducts.
Update of your IEEE1394 hard- and software kan only be provided on the site of your IEEE1394 hard- software provider. Please contact them if there is any update available.
Windows (c) copyright is a trademark
of Microsoft Corp. All other products mentioned are registered trademarks or
trademarks of their respective companies.